TEL: 886-3-6661059
Email: mesoscope@mesoscope.com.tw
繁中 / 簡中
Log In

MSCT-SA025TPL013TC025-CR200B

Product

Data Sheet Request add to Inquiry Cart Back

MSCT-SA025TPL013TC025-CR200B

CR200 is ideal for failure analysis ≧180nm process.

  • Available on FEI, JEOL, Tescan, Zeiss and Kleindiek systems.
  • No need Chemical Clean Process.
  • SEM inspection before packing.
  • Tip's Resistance is under 50ohm.
  • MESOSCOPE unique MST(Micro Surface Treatment) process to increase tip uniformity.
  • Wire diameter option: 0.1mm, 0.25mm, 0.3mm, 0.5mm and 0.6mm.
  • Available to be measured ≧180nm process.

Material  Tungsten Coating Material NA
Wire Diameter(WD) 0.25mm Total Probe Length(TPL)  12.5mm
Tape Cone(TC) 2.5mm Tip Body Diameter(TBD) -
Tape Cone Angle Type - Curvature Radius(CR) <200nm
Probe Pre-bent YES Pre-sleeved into Capillary -
Suitable for measuring Process ≧180nm Process

 

 

 
 
MSCT - SA 025 TPL013 TC025 A2 - CR200 B
    (1) (2) (3) (4) (5)   (6) (7)
  1. Application: SA series for SEM based electrical nano-probing application.
  2. Wire diameter (WD): 0.25mm
  3. Total probe length (TPL): 12.5mm
  4. Tape Cone length (TC): 2.5mm
  5. Cone angle type: A2
    Available options: A2 and A3
  6. Curvature radius (CR): <200nm
    Diameter at position of 200nm below apex is in the range of 300nm to 450nm.
  7. Probe Pre-bent type.
    Standard pre-bent angle is 45 degree. Customized Available.

MESOSCOPE is the world leader in Nano-scale metallic probe manufacturer.

2F.-2, No.9, Zhanye 1st Rd., East Dist., Hsinchu City 30078, Taiwan

886-3-6661059

mesoscope@mesoscope.com.tw

About

NEWS&EVENTS

Product

SUPPORT

CONTACT